Windows PC & Monitor Screen Test
Comprehensive display evaluation for Dell, ASUS ROG, LG UltraGear, Samsung Odyssey, Alienware, and Lenovo monitors.
Diagnostic Sequence Preview
This test automatically cycles through calibrated solid color surfaces.
What to Look For
Whether testing a 240Hz Fast-IPS gaming monitor, a 4K QD-OLED panel, or a Windows laptop screen, this test provides full-screen diagnostic patterns to check for dead pixels, IPS glow, and color calibration.
- IPS glow in bezel corners when viewing black screens at an angle.
- Backlight bleeding along top and bottom frame mounting points.
- Dead or stuck subpixels on pure color fields.
- Gamma and color banding in gradient transitions.
Display Preparation Tips
- 1Turn off Windows Night Light in Settings > System > Display.
- 2Ensure GPU output dynamic range is set to Full RGB (0-255) in NVIDIA Control Panel or AMD Radeon Software.
- 3Press 'F' or F11 to enter browser fullscreen mode.
- 4Inspect in a dimly lit room to detect subtle backlight bleed.
Frequently Asked Questions
What is the ISO 9241-307 standard for Windows monitors?
Most consumer and gaming monitors are Class II displays, which permit up to 2 permanently bright pixels, 2 permanently dark pixels, and 5 defective subpixels per million pixels before qualifying for standard warranty replacement.
Does HDR mode affect this screen test?
For checking standard SDR sRGB subpixel accuracy, we recommend temporarily disabling Windows Auto HDR.
Ready to Check Your Screen?
Launch full-screen diagnostics right now to verify pixel health, backlight uniformity, and color fidelity across your entire display.
Start Free Screen Test